▪	Ecru guest towel

▪	Scrap of brown linen

▪	Gold rayon thread

▪	4 x 4 piece of 3 mm Puffy Foam®

▪	Design from “Fun with Puffy Foam”

▪	Thread to match the the towel

▪	Steam-a-Seam®

▪	Tear-away stabilizer

▪	Temporary spray adhesive

1.	Cut the lower part of the towel off, leaving 5/8 inch of the towel band.

2.	Cut the linen 10 inches by the width of the towel plus ½ inch on each side. Sew this onto the front towel band. Press the linen down.

3.	Turn the other end of the linen up ½ inch then turn the linen up towards the front matching fold to the seam. The ½ in hem should be facing you.

4.	Sew the two sides of the linen and turn the linen right side out.

5.	Use the Seam-a-Seam to secure the back of the linen to the towel band covering the band completely.

6.	Sew  a decorative stitch or two close straight seams at the top of the linen to secure it.

7.	Print a template and attach it to the

8.	Spray the stabilizer with the adhesive and then hoop the stabilizer.

9.	Add the towel towel over the top of the stabilizer and add the Puffy Foam on top (you don’t need any other topper).

10.	Embroider the design and remove the stabilizer and puffy foam.