pp1232e15f.png
pp6683465e.png
 Home
Shop / Products
Contact Us
Classes
pp96d35405.png
ppc89b792c.png
pp3a2b15cb.png
pp0512a228.png
pp7697491d.png
About Us
pp9d53110e.png
Free Projects
pp5adc6cee.png
ppb7a053e4.png
pp3816917b.png
Wholesale Login
pp11e4054b.png
Next
r
Silverware Holder
Supplies
·
20 x 10½ inch piece of linen
·
20 x 10 ½ piece of silver cloth or felt
·
2 1 yard pieces of ¼ inch silk ribbon
·
Embroidery design
(Flower from Dainty Borders was
used twice)

·
Stabilizer
·
Wash-away fabric marker
·
Size 80 universal needle

Directions

1.
Lay the linen so the short side is top and bottom and the long sides are left and right.Measure up  2 ½ inches fro the short side of the linen and 5 inches from the left side (with the short side at the bottom) and make a mark. This is the center of your embroidery.
2.
Embroider the design in this spot.
3.
With right sides together, sew the linen and silver cloth all the way around all 4 sides leaving a 3-4 inch hole on one side to turn.
4.
Turn the piece right side out and press.  Press one short end up 5 inches.
5.
Top stitch around all 4 sides - you’ll be sewing the fold you made above.  
6.
Mark 4 lines on the 5 inch piece and sew a straight line to create 5 little silverware pockets.
7.
Fold the top short end over the lower one and top stitch the fold.
8.
Sew two pieces of ribbon 2 inches from each folded and sewn sides and 6 inches from the side that has the embroidery.
9.
Place the silver in the pockets and roll up the holder.
pp8079bdfc.png
pp0d056287.png
Previous